The carbon monoxide gas detectors of the ATX/ECL series are ATEX and IECEx certified and with IP66 degree of protection. They use professional electrochemical sensor.
They are designed to be connected to analytic control panels with 4÷20 mA inputs (like MODULA 4 and MODULA 8) or to digital control panels via RS485 serial connection (like MODULA 40 and MODULA 128). ATX detectors are suitable for use in all industrial and commercial applications where the detection of carbon monoxide gas is required.
ATX detectors are certified ATEX and IECEx for gas and dust tight
- II2G Ex db IIC T6 Gb
- II2D Ex tb IIIC T6 Db
They are suitable for installation in ATEX classified ZONE 1; areas where explosive atmospheres may be present, during normal operations; they are also suitable for installation in ATEX classified ZONE 2.
They are suitable for the gas detection in refineries, compression stations, pharmaceutical plants, chemical and petrochemical plants, gas turbines, carbon monoxide gas deposits and laboratories.
The head of the detector ATX/ECL use an electrochemical sensor module of high quality and precision combined with industrial-type control electronics, it is replaceable to allow rapid and reliable maintenance of the systems and has operating life of 5 years.
The aluminium alloy container makes the detector particularly suitable for environments with strong chemical aggression giving it a high mechanical resistance.
Thanks to the high selectivity, the ATX/ECL detectors are resistant to interfering gases or combustible vapours often present in industrial environments.
The detectors comply with the following standards:
IEC 60079-0, IEC 60079-1
EN ISO/IEC 80079-34:2011